1-814-535-3505
Request Quote

Download the Free Urethane Resin 101 Guide

Download our Urethane Resin 101 Guide

Polyurethane coatings are amongst one of the most popular choices for conformal coating applications, they are available as single component, two component, UV curable, and water borne systems. Download the Urethane Resin 101 Guide today to learn more about this popular coating!

Receive your instant download of the Urethane Resin 101 Guide now by filling out this simple form.

Urethane vs Parylene Conformal Coating

What's Best for Your Project

Parylene and urethane conformal coatings share many characteristics. Both are physically strong, resistant to chemicals and mitigate tin whisker formation. This doesn't mean that the two compounds are interchangeable, though. While parylene offers a unique blend of capabilities, many projects choose urethane because of its cost, strength and other advantages.

Shared Characteristics
Parylene and urethane share both disadvantages and advantages. For example, both are relatively challenging to rework. Because no known chemical can break it down, parylene is best removed through microabrasion. This technique uses a small jet of air that carries abradants to gradually break down the coating. While urethane can be removed with chemicals, due to its chemical resistance it too can require mechanical reworking techniques.

Both compounds share a common drawback -- their temperature ratings. Most parylene variants can withstand 80°C continuous operating temperatures and most urethanes in the 125°C range. This means that they can protect most items that will be used in the real world. However, neither can withstand the kind of heat inside of an operating engine or an oven. This limits their applicability in high heat and extremely cold environments.

On the other hand, they also both share a common benefit. While the mechanism by which tin whiskers form remains unclear, one thing is clear is that the right coating can retard their growth to prevent them becoming a serious issue. Both parylene and urethane provide an adequately thick and strong coating to protect the surface of the tin and prevent additional structures from becoming a threat that could end up short circuiting the item.

Solvents, Parylene and Urethane
Where they are both uniquely strong is in their resistance to solvents. Both urethane and parylene coatings are impervious to them. This makes then excellent choices for applications where they will be exposed to any solvent or solvent-like chemical. Urethane, simply because of its thickness, even offers an extra degree of protection against them.

Hardness and Vibration
One of urethane's other strengths is also a potential weakness. It is a strong coating, creating a hard shell around the item that it covers. However, this characteristic can also make it brittle. In environments where it will be subjected to high levels of vibration, its structure can break down, eventually causing it to fail. While parylene is hard enough to provide a degree of physical protection, it also has more flexibility. This makes it much less likely to fail under vibration.

On the other hand, urethane's hardness make it an excellent choice for settings where it will be exposed to abrasion. While both coatings resist abrasive forces, urethane offers an extra degree of protection.

Deposition and Curing

One of the areas where the two coatings diverge significantly is in how they are placed on the item that will ultimately be coated. Parylene is applied via vacuum deposition and has no cure, while urethane is the opposite.

Urethane gets applied much like other liquid coatings. It can be applied via dip or by being brushed on. Other methods include spraying it onto the substrate using either human or robotic labor. Once applied, urethane requires an extended period of time to cure. While it can be dry to the touch within a few minutes, a full cure is usually measured in hours or, with some types of urethane, in as long as 30 days.

Parylene cannot be applied the same way as urethane and has no cure. Deposition requires specialized equipment that vaporizes the parylene dimer and applies it in a vacuum. This process can take over 24 hours, depending on the variant of parylene used and the thickness desired. Once it is deposited, though, it has essentially no curing time since it is not a liquid.

Request QuoteFree Urethane 101 Guide
Download our Parylene 101 Guide

Download Our Urethane Resin 101 Guide